Counter Pressure Bottle Filler,Diameter Of About 0.71“

Instructions for use:1. Clean, then close all valves and connect other accessories2. Insert the filler into the bottle so that the cork fits tightly.3. Open the vent valve to let carbon dioxide in and oxygen out.4. Close the vent valve and fill the bottle with carbon dioxide until the pressure in the bottle is 3-5 psi lower than the barrel pressure.5. Turn the three-way valve to the liquid side, fill the beer into the bottle, and open the vent valve if the flow rate slows down. The lower the pressure, the faster the flow rate.6. When finished, close the three-way valve to a vertical position and quickly cover the bottle cap.Specifications:Name: Homebrew Beer Bottling MachineMaterial: Stainless steelSuitable for bottles with inlet inner diameter: 0.71 inchesSize: 39.5 cm/15 inchesWeight: 0.8 kgPackage Includes:1 × Manual Beer Bottle FillerNotes:1. Due to manual measurement, 2-3cm deviation is allowed.2. Different monitors have different calls, and the product color is subject to the actual product.

• Back Pressure Filling Machine:This wine bottle filling equipment is suitable for wine bottles with a bottle mouth diameter of about 0.71in. Through the filling tube and silicone plug (replaceable), CO2 gas can be filled into the bottom of the bottle and sealed to create a good environment for brewing
• High Quality:The bottle filling machine is made of high-quality stainless steel, which is not easy to rust, corrosion-resistant, durable, will not change or affect the taste of the beverage, and is safer to use
• Pressure Gauge:The beer brewing and bottling tools are equipped with a pressure gauge, which can accurately display the pressure in the bottle, so as to better control the filling and save time and energy. The pressure in the bottle should be 3-5 psi lower than the pressure in the barrel
• Easy To Use:The stainless steel back pressure filling machine is easy to install, equipped with a 3-way valve, which can be controlled with one hand, and can be connected with special tape to ensure 100% leakage. The exhaust valve can adjust the pressure in the bottle and release the beer foam
• Practical Tools:The back pressure filling machine has a simple structure and is easy to use. It can be used to make soda water, soda, carbonated beer, etc., allowing you to DIY your favorite carbonated beverage